Direct-Pure UP Ultrapure & RO Lab Water System
The Direct-Pure UP Ultrapure & RO Lab Water System is an integrated system that produces ultrapure and reverse osmosis (RO) water from tap water directly. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.
Features :
- Electrical and water compartments are completely segregated, thus safer to operate.
- The fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane and cartridge life monitoring as well as many other programs for convenient operation.
- The pre-rinsing program starts automatically when a new RO membrane is installed so there is no need for users to set up additional cleaning procedures.
- Two sets of dual-column purification cartridges work sequentially to ensure thorough removal of ions and organics in water.
- The system recirculates automatically every hour to prevent microbial from growing
- Resistivity is measured by a high-precision resistivity meter.
- Users can set water dispensing time for easy water collection.
- The system is equipped with a 30-liter PE tank (upgradable to a 60-liter) and a liquid level sensor.
- A 0.2 μm final filter or ultrafiltration filter (optional) removes final contaminants.
- RephiLe can provide full document support to meet users’ GMP, GLP, FDA and other certification requirements.
Main Application Ultrapure Water :
* HPLC mobile phase preparation
* Preparation of reagent blank solution
* As sample diluents for GC, HPLC, AA, ICP-MS and other analytical techniques
* Preparation of buffer and culture media for mammalian cell culture
* Preparation of molecular biology reagents, etc.
Main Application RO Pure Water :
* Glassware cleaning
* Washing machine for glassware
* Water bath water
* Autoclave
* Feed water to laboratory animals
Specification :
a. Feed Water Quality
- Tap water : Municipal water, TDS < 1000 ppm (2000 μS/cm)
- Operating temperature : 5~45 ℃
- Feed water pressure : 15 - 90 psi (1 - 6 bar)
- Ultrapure water (Type I) : 1.5 L/min at 25℃
- RO Water : 10 to 30 L/h at 25℃
- RO water conductivity : Typically < 20 μS/cm
- Resistivity : 18.2 MΩ·cm at 25℃
- TOC : < 10 ppb (< 5 ppb with a dual wavelength UV lamp)
- Particle (> 0.2 μm) : < 1/ml (with a 0.2 μm final filter)
- Microorganisms : < 1 cfu/ml (with a 0.2 μm final filter)
- Pyrogens (endotoxins) : < 0.001 Eu/ml (with UF filter)
- RNase : < 0.01ng/ml(with UF filter)
- DNase : < 4 pg/μL(with UF filter)
e. Net Weight : Approx. 25 Kg
Untuk informasi lebih lanjut dan pemesanan silahkan menghubungi kami :
CV. ALMANDIRI SCIENTIFIC
Jl. Wibawa Mukti II RT 002 RW 04 NO.71 Kp. Pedurenan
Jatiasih, Bekasi 17425 - Jawa Barat
Tel : 021 9772 9679
Mobile : 0812 9124 7778 / 0812 9049 9696
Pin BB : 295E65C6
Email : sulfan@almandiri.com
Website : www.almandiri.com
Tidak ada komentar:
Posting Komentar